3T JLC detector parameter

A tentaive parameter set for JLC detector with 3 Tesla solenoid. They will be subject to change according to the future studies. Please see a report on A performance of 3 Tesla detector studied by lclib-2000-1. The parameter shown here corresponds to the Quick Simulator parameter file, simjlc/param/jlc3T.com. Your feed back is highly welcome. Please send your comment to acfa-sim@acfahep.kek.jp or to me.
Last update: 12-June-2000

Update History

  • Size of Iron yoke is reduced and Geometry of conventional QC1/QC2 is included.(12-June-2000)
    •

    1. IR region
    1.1) Beampipe(BP)
    1.1.1) Central Region
    Matterial : Be
    Radius : 2.0 cm
    Zmin : -100.0 cm
    Zmax :  100.0cm
    Thickness : 0.0015 (r.l.)
    1.1.2) Outer Region
    1.2) Vertex Detector(VTX)
    Matterial: Si
    4 layers  at radius :  2.4,  3.6,  4.8, and 6.0cm
    Z coverage : |cos_theta| < 0.9015
    Resolution : 4 micron-m in r-phi and z
    1.3) Intermediate Tracker(IT)
    Matterial: 0.6% radiation length at each layer
    5 layers  at radius :  9.0,  16.0,  23.0, 30.0, and 37.0cm
    Z coverage : |cos_theta| < 0.90
    Resolution : 40 micron-m in r-phi and z
    1.4) Luminosity monitor(LUM)
    1.5) Tungsten Mask
    1.6) CH2 mask
    1.7) Conventional QC1/QC2 (transparencies, 25 pages of pdf(Japanese),484kB) or ps.gz(Japanese), 371kB
    1.8) Super QC1/QC2
    1.9) Support Tube
    2) Central Tracker(CDC)
    2.1) Sensitive Region
    Radius: 45 cm to 155 cm
    Z range: -155 cm to 155 cm
    Number of wire : 50
    Minimum nuber of wire for good tracking: 10
    r-phi resolution : 85 micron-m
    z resolution : 0.3 cm
    Chamber gas : CO2/C4H10 90/10 % 1atm
    Thickness: 5.5 x 10-5 r.l/cm
    3) Calorimeter  -> precise hardware parameters
    3.1) Elemag calorimeter(EMC)
  • Approximation for Quick Simulator

    • Surface radius of barrel : 160 cm
    Z range of barrel : -190 cm to 190 cm
    Endcap : radius from 45 cm to 160 cm at Z = +- 190cm
    Number of phi segment : 252
    Number of thera segment : 90
    Radial sgmentation of Endcap : 29
    Resolution : 0.15/sqrt(E) + 0.01
    3.2) Hadron Calorimeter (HDC)
    4) Solenoid Magnet
    Magnetic Field : 3.0 tesla


    5) Iron Yoke

    Geometry of Iron Yoke is revised on 14-June-2000. See the report of FFIR group meeting
    A drawing of XY and RZ view(PDF)
    ME10 file of 3 Tesla detector
    6) Muon System
    Akiya Miyamoto, KEK
    E-Mail: akiya.miyamoto@kek.jp
    To ACFA-SIM home page